Mpeg 2

Warning: mkdir() [function.mkdir]: Permission denied in /home/webs/affiliatelib2/CacheManager.php on line 12

Warning: mkdir() [function.mkdir]: No such file or directory in /home/webs/affiliatelib2/CacheManager.php on line 12

Warning: fopen(/home/templatecore2cache//*cluesnet.com/68/68bb9e47a95bccf2b3c3ecd19697dc432007e2ea.tc2cache) [function.fopen]: failed to open stream: No such file or directory in /home/webs/affiliatelib2/CacheManager.php on line 130

Warning: fwrite(): supplied argument is not a valid stream resource in /home/webs/affiliatelib2/CacheManager.php on line 131

Warning: fclose(): supplied argument is not a valid stream resource in /home/webs/affiliatelib2/CacheManager.php on line 132

MPEG-2 is a standard for "the generic coding of moving pictures and associated audio information". ISO/IEC 13818 MPEG-2 at the ISO Store. It describes a combination of Lossy compression video compression and lossy audio compression (audio data compression) methods which permit storage and transmission of movies using currently available storage media and transmission bandwidth. It is also used by amateur (ham) radio operators that run LIVE two-way TV.

Main characteristics MPEG-2 is widely used as the format of digital television signals that are broadcast by terrestrial television (over-the-air), Cable television, and direct broadcast satellite Television systems. It also specifies the format of movies and other programs that are distributed on DVD and similar disks. As such, TV stations, TV receivers, DVD players, and other equipment are often designed to this standard. MPEG-2 was the second of several standards developed by the Moving Pictures Expert Group (MPEG) and is an international standard (International Organization for Standardization/International Electrotechnical Commission 13818). Parts 1 and 2 of MPEG-2 were developed in a joint collaborative team with ITU-T, and they have a respective catalog number in the ITU-T Recommendation Series.

While MPEG-2 is the core of most digital television and DVD formats, it does not completely specify them. Regional institutions can adapt it to their needs by restricting and augmenting aspects of the standard. See #Profiles and Levels.

MPEG-2 includes a Systems section, part 1, that defines two distinct, but related, container formats. One is the Transport stream, designed to carry digital video and audio over possibly lossy media, such as broadcasting, examples of which include ATSC Standards and DVB. MPEG-2 Systems also defines Program Stream, a container format designed for reasonably reliable media such as optical disks, DVDs and SVCDs. MPEG-2/System is formally known as ISO/IEC 13818-1 and as ITU-T Rec. H.222.0. ITU-T Rec. H.222.0

The Video section, part 2 of MPEG-2, is similar to the previous MPEG-1 standard, but also provides support for interlaced video, the format used by analog broadcast TV systems. MPEG-2 video is not optimized for low bit-rates, especially less than 1 Mbit/s at standard definition resolutions. However, it outperforms MPEG-1 at 3 Mbit/s and above. All standards-compliant MPEG-2 Video decoders are fully capable of playing back MPEG-1 Video streams. MPEG-2/Video is formally known as ISO/IEC 13818-2 and as H.262. ITU-T Rec. H.262

With some enhancements, MPEG-2 Video and Systems are also used in some High-definition television transmission systems.

The MPEG-2 Audio section, defined in part 3 of the standard, enhances MPEG-1's audio by allowing the coding of audio programs with more than two surround sounds. This method is backwards-compatible, allowing MPEG-1 audio decoders to decode the two main stereo components of the presentation.

Part 7 of the MPEG-2 standard specifies a rather different, non-backwards-compatible audio format. Part 7 is referred to as MPEG-2 Advanced Audio Coding. While AAC is more efficient than the previous MPEG audio standards, it is much more complex to implement and somewhat more powerful hardware is needed for encoding and decoding. Advanced Audio is also defined in Part 3 of the MPEG-4 standard.

Video coding (simplified) An HDTV camera generates a raw video stream of more than one billion bits per second. This stream must be compressed if digital TV is to fit in the bandwidth of available TV channels and if movies are to fit on DVDs. Fortunately, video compression is practical because the data in pictures is often redundant in space and time. For example, the sky can be blueacross the top of a picture and that blue sky can persist for frame after frame. Also, because of the way the eye works, it is possible to delete some data from video pictures with almost no noticeable degradation in image quality.

TV cameras used in broadcasting usually generate PAL pictures a second (in Europe and elsewhere) or NTSC pictures a second (in North America and elsewhere). Digital television requires that these pictures be digitized so that they can be processed by computer hardware. Each picture element (a pixel) is then represented by one Luma (video) number and two chrominance numbers. These describe the brightness and the color of the pixel (see YCbCr). Thus, each digitized picture is initially represented by three rectangular arrays of numbers.

A common (and old) trick to reduce the amount of data is to separate the picture into two fields: the "top field," which is the odd numbered rows, and the "bottom field," which is the even numbered rows. The two fields are displayed alternately. This is called interlaced video. Two successive fields are called a frame. The typical frame rate is then 25 or 29.97 frames per second. If the video is not interlaced, then it is called progressive video and each picture is a frame. MPEG-2 supports both options.

Another trick to reduce the data rate is to Chroma subsampling the two chrominance matrices. In effect, the remaining chrominance values represent the nearby values that are deleted. Thinning works because the eye is more responsive to brightness than to color. The 4:2:2 chrominance format indicates that half the chrominance values have been deleted. The 4:2:0 chrominance format indicates that three quarters of the chrominance values have been deleted. If no chrominance values have been deleted, the chrominance format is 4:4:4. MPEG-2 allows all three options.

MPEG-2 specifies that the raw frames be compressed into three kinds of frames: intra-coded frames (I-frames), predictive-coded frames (P-frames), and bidirectionally-predictive-coded frames (B-frames).

An I-frame is a compressed version of a single uncompressed (raw) frame. It takes advantage of spatial redundancy and of the inability of the eye to detect certain changes in the image. Unlike P-frames and B-frames, I-frames do not depend on data in the preceding or the following frames. Briefly, the raw frame is divided into 8 pixel by 8 pixel blocks. The data in each block is transformed by a discrete cosine transform. The result is an 8 by 8 matrix of coefficients. The transform converts spatial variations into frequency variations, but it does not change the information in the block; the original block can be recreated exactly by applying the inverse cosine transform. The advantage of doing this is that the image can now be simplified by Quantization (image processing) the coefficients. Many of the coefficients, usually the higher frequency components, will then be zero. The penalty of this step is the loss of some subtle distinctions in brightness and color. If one applies the inverse transform to the matrix after it is quantized, one gets an image that looks very similar to the original image but that is not quite as nuanced. Next, the quantized coefficient matrix is itself compressed. Typically, one corner of the quantized matrix is filled with zeros. By starting in the opposite corner of the matrix, then zigzagging through the matrix to combine the coefficients into a string, then substituting run-length encoding for consecutive zeros in that string, and then applying Huffman coding to that result, one reduces the matrix to a smaller array of numbers. It is this array that is broadcast or that is put on DVDs. In the receiver or the player, the whole process is reversed, enabling the receiver to reconstruct, to a close approximation, the original frame.

Typically, every 15th frame or so is made into an I-frame. P-frames and B-frames might follow an I-frame like this, IBBPBBPBBPBB(I), to form a Group of pictures; however, the standard is flexible about this.

Macroblocks P-frames provide more compression than I-frames because they take advantage of the data in the previous I-frame or P-frame. I-frames and P-frames are called reference frame (video)s. To generate a P-frame, the previous reference frame is reconstructed, just as it would be in a TV receiver or DVD player. The frame being compressed is divided into 16 pixel by 16 pixel macroblocks. Then, for each of those macroblocks, the reconstructed reference frame is searched to find that 16 by 16 macroblock that best matches the macroblock being compressed. The offset is encoded as a "motion vector." Frequently, the offset is zero. But, if something in the picture is moving, the offset might be something like 23 pixels to the right and 4 pixels up. The match between the two macroblocks will often not be perfect. To correct for this, the encoder computes the strings of coefficient values as described above for both macroblocks and, then, subtracts one from the other. This "residual" is appended to the motion vector and the result sent to the receiver or stored on the DVD for each macroblock being compressed. Sometimes no suitable match is found. Then, the macroblock is treated like an I-frame macroblock.

The processing of B-frames is similar to that of P-frames except that B-frames use the picture in the following reference frame as well as the picture in the preceding reference frame. As a result, B-frames usually provide more compression than P-frames. B-frames are never reference frames.

While the above generally describes MPEG-2 video compression, there are many details that are not discussed including details involving fields, chrominance formats, responses to scene changes, special codes that label the parts of the bitstream, and other pieces of information.

Audio encoding MPEG-2 also introduces new audio encoding methods.These are

low bitrate encoding with halved sampling rate (MPEG-1 Layer MPEG-1 Audio Layer 1/MPEG-1 Audio Layer 2/MPEG-1 Audio Layer 3 LSF)
multichannel encoding with up to 5.1 channels
Advanced Audio Coding

Profiles and Levels MPEG-2 supports wide range of applications from mobile to high quality HD editing. For many applications, it's unrealistic and too expensive to support the entire standard. To allow such applications to support only subsets of it, the standard defines profile and level.

The profile defines the subset of features such as compression algorithm, chroma format, etc. The level defines the subset of quantitative capabilities such as maximum bit rate, maximum frame size, etc.

A MPEG application then specifies the capabilities in terms of profile and level. For example, a DVD player may say it supports up to main profile and main level (It's often written as MP@ML). It means the player can play back any MPEG stream encoded as MP@ML or less.

The table below summarizes the limitations of each profile and level.

{| class="wikitable"|+ MPEG-2 Profiles! Abbr. !! Name !! Frames !! chroma format !! Streams !! Comment|-! SP| Simple Profile || P, I || 4:2:0 || 1 || no interlacing|-! MP| Main Profile || P, I, B || 4:2:0 || 1 |||-! 422P| 4:2:2 Profile || P, I, B || 4:2:2 || 1 |||-! SNR| SNR Profile || P, I, B || 4:2:0 || 1-2 || SNR: Signal to Noise Ratio|-! SP| Spatial Profile || P, I, B || 4:2:0 || 1-3 ||rowspan="2"| low, normal and high quality decoding|-! HP| High Profile || P, I, B || 4:2:2 || 1-3|}{| class="wikitable"|+ MPEG-2 Levels! Abbr. !! Name !! Pixel/line !! Lines !! Framerate (Hz) !! Bitrate (Mbit/s)|-! LL| Low Level| 352 || 288 || 30 || 4|-! ML| Main Level| 720 || 576 || 30 || 15|-! H-14| High 1440| 1440 || 1152 || 30 || 60|-! HL| High Level| 1920 || 1152 || 30 || 80|}{| class="wikitable"! Profile @ Level! Resolution (px)! Framerate max. (Hz)! Sampling! Bitrate (Mbit/s)! Example Application|-! SP@LL| 176 × 144 || 15 || 4:2:0 || 0.096| Wireless handsets|-!rowspan="2"| SP@ML| 352 × 288 || 15 ||rowspan="2"| 4:2:0 ||rowspan="2"| 0.384|rowspan="2"| PDAs|-| 320 × 240 || 24|-! MP@LL| 352 × 288 || 30 || 4:2:0 || 4| Set-top boxes (STB)|-!rowspan="2"| MP@ML| 720 × 480 || 30 ||rowspan="2"| 4:2:0 ||rowspan="2"| 15 (DVD: 9.8)|rowspan="2"| DVD, SD-DVB|-| 720 × 576 || 25|-!rowspan="2"| MP@H-14| 1440 × 1080 || 30|rowspan="2"| 4:2:0 ||rowspan="2"| 60 (HDV: 25)|rowspan="2"| HDV|-| 1280 × 720 || 30|-!rowspan="2"| MP@HL| 1920 × 1080 || 30 ||rowspan="2"| 4:2:0 ||rowspan="2"| 80|rowspan="2"| ATSC 1080i, 720p60, HD-DVB (HDTV)|-| 1280 × 720 || 60|-! 422P@LL| || || 4:2:2 |||-!rowspan="2"| 422P@ML| 720 × 480 || 30 ||rowspan="2"| 4:2:2 ||rowspan="2"| 50|rowspan="2" | Sony IMX using I-frame only, Broadcast "contribution" video (I&P only)|-| 720 × 576 || 25|-!rowspan="2"| 422P@H-14| 1440 × 1080 || 30 ||rowspan="2"| 4:2:2 ||rowspan="2"| 80|rowspan="2"| Potential future MPEG-2-based HD products from Sony and Panasonic|-| 1280 × 720 || 60|-!rowspan="2"| 422P@HL| 1920 × 1080 || 30 ||rowspan="2"| 4:2:2 ||rowspan="2"| 300|rowspan="2"| MPEG-2-based HD products from Panasonic|-| 1280 × 720 || 60|}

Applications DVD The DVD standard uses MPEG-2 video, but imposes some restrictions:

Allowed Resolutions

720 × 480, 704 × 480, 352 × 480, 352 × 240 pixel (NTSC)
720 × 576, 704 × 576, 352 × 576, 352 × 288 pixel (PAL)

Allowed Aspect ratio (image) (Display AR)

4:3
16:9
(1.85:1 and 2.35:1, among others, are often listed as valid DVD aspect ratios, but are actually just a 16:9 image with the top and bottom of the frame masked in black)

Allowed Frame rates

29.97 frame/s (NTSC)
25 frame/s (PAL)

Note: By using a pattern of REPEAT_FIRST_FIELD flags on the headers of encoded pictures, pictures can be displayed for either two or three fields and almost any picture display rate (minimum ⅔ of the frame rate) can be achieved. This is most often used to display 23.976 (approximately film rate) video on NTSC.

Audio+video bitrate

Video peak 9.8 Mbit/s
Total peak 10.08 Mbit/s
Minimum 300 kbit/s

Chroma subsampling
Additional subtitles possible
Closed captioning#DVD (NTSC only)
Audio

LPCM (LPCM): 48 kHz or 96 kHz; 16- or 24-bit; up to six channels (not all combinations possible due to bitrate constraints)
MPEG Layer 2 (MP2): 48 kHz, up to 5.1 channels (required in PAL players only)
Dolby Digital (DD, also known as AC-3): 48 kHz, 32–448 kbit/s, up to 5.1 channels
Digital Theater Systems (DTS): 754 kbit/s or 1510 kbit/s (not required for DVD player compliance)
NTSC DVDs must contain at least one LPCM or Dolby Digital audio track.
PAL DVDs must contain at least one MPEG Layer 2, LPCM, or Dolby Digital audio track.
Players are not required to play back audio with more than two channels, but must be able to downmixing multichannel audio to two channels.

GOP structure

Sequence header must be present at the beginning of every GOP
Maximum frames per GOP: 18 (NTSC) / 15 (PAL), i.e. 0.6 seconds both
Closed GOP required for multiple-angle DVDs

DVB Application-specific restrictions on MPEG-2 video in the DVB standard:

Allowed resolutions for SDTV:

720, 640, 544, 480 or 352 × 480 pixel, 24/1.001, 24, 30/1.001 or 30 frame/s
352 × 240 pixel, 24/1.001, 24, 30/1.001 or 30 frame/s
720, 704, 544, 480 or 352 × 576 pixel, 25 frame/s
352 × 288 pixel, 25 frame/s

For HDTV:

720 x 576 x 50 frames/s progressive (576p50)
1280 x 720 x 25 or 50 frames/s progressive (720p50)
1440 or 1920 x 1080 x 25 frames/s progressive (1080p25 – film mode)
1440 or 1920 x 1080 x 25 frames/s interlace (1080i25)
1920 x 1080 x 50 frames/s progressive (1080p50) possible future H.264/AVC format

ATSC Allowed video resolutions:

1920 × 1080 pixel, 30 frame/s (1080i)
1280 × 720 pixel, 60 frame/s (720p)
720 × 576 pixel, 25 frame/s (576i, 576p)
720 or 640 × 480 pixel, 30 frame/s (480i, 480p)

Note: 1080i is encoded with 1920 × 1088 pixel frames, but the last 8 lines are discarded prior to display.

MPEG-2 audio was a contender for the ATSC standard during the Digital Television "Grand Alliance (HDTV)" shootout, but lost out to Dolby AC-3.

ISO/IEC 13818 Part 1: Systems – describes synchronization and multiplexing of video and audio. Also known as ITU-T Rec. H.222.0 . See MPEG transport stream.Part 2: Video – compression codec for interlaced and non-interlaced video signals. Also known as ITU-T Rec. H.262.Part 3: Audio – compression codec for perceptual coding of audio signals. A multichannel-enabled extension of MPEG-1 audio.Part 4: Describes procedures for testing compliance.Part 5: Describes systems for Software simulation.Part 6: Describes extensions for DSM-CC (Digital Storage Media Command and Control).Part 7: Advanced Audio Coding (AAC).Part 9: Extension for real time interfaces.Part 10: Conformance extensions for DSM-CC.

(Part 8: 10-bit video extension. Primary application was studio video. Part 8 has been withdrawn due to lack of interest by industry.)

Patent holders Approximately 640 patents worldwide make up the "essential" patents surrounding MPEG-2. These are held by over 20 corporations and one university. Where software patentability is upheld, the use of MPEG-2 requires the payment of licensing fees to the patent holders via the MPEG Licensing Association. The patent pool is managed and administered by MPEG Licensing Authority, a private organization. The development of the standard itself took less time than the patent negotiations. Richard M Stallman, Patents - Barriers to development Theora Video and Vorbis Audio

Alcatel-Lucent
Canon Inc.
Columbia University
France Télécom (France Télécom)
Fujitsu
General Electric Capital Corporation
General Instrument Corp. (now the broadband division of Motorola)
General Electric Technology Development, Inc.
Hitachi, Ltd.
KDDI Corporation (KDDI)
LG Electronics Inc.
Matsushita
Mitsubishi
Nippon Telegraph and Telephone (Nippon Telegraph and Telephone)
NXP
Philips
Robert Bosch GmbH
Samsung
Sanyo Electric Co., Ltd.
Scientific Atlanta
Sharp Corporation
Sony
Thomson SA Licensing S.A.
Toshiba
JVC of Japan, Limited (JVC).

According to the MPEG-LA Licensing Agreement MPEG-LA, any use of MPEG-2 technology is subject to royalties.

Encoders have a $0.50 charge for each product.
Decoders have a $0.50 charge for each product. MPEG-2 Systems PATENT PORTFOLIO LICENSE
Royalty-based sales of encoders and decoders are subject to different rules and $2.50 per unit. MPEG-2 PATENT PORTFOLIO LICENSE
Also, any packaged medium (DVDs/Data Streams) is subject to licence fees according to length of recording/broadcast.

In the case of free software such as VLC media player (which uses the ffmpeg library) and in which the software is not sold, the end-user bears the royalty.

See also

MPEG transport stream
MPEG-1 Audio Layer II
MPEG-4
MP2, MP3
Advanced Audio Coding
DVD
Theora

References

External links

A Beginners Guide for MPEG-2 Standard
MPEG-2 Overview
MPEG-2 video compression
MIT 6.344 – Slides from lectures on video compression at MIT.
A Discrete Cosine Transform tutorial
IPTV MPEG and Quality of Experience Testing
OpenIPMP: Open Source DRM Project for MPEG-2
ISO/IEC 13818 – MPEG-2 at the ISO Store.

MPEG-2 from FOLDOC
MPEG-2 < compression, standard, algorithm, file format > A variant of the MPEG video and audio compression algorithm and file format, optimised for broadcast quality video.

MPEG-2 AAC Low Profile from FOLDOC
MPEG-2 AAC Low Profile < compression, standard, algorithm, file format > A successor of MP3 allowing transparent coding at data rates of 75-80% of that of MP3.

MPEG-2 Overview
MPEG-2. MPEG is an encoding and compression system for digital multimedia content defined by the Motion Pictures Expert Group (MPEG). MPEG-2 extends the basic MPEG system to ...

MPEG-2 Transmission
The MPEG-2 standards define how to format the various component parts of a multimedia programme (which may consist of: MPEG-2 compressed video, compressed audio, control data and ...

MPEG-2 video compression
MPEG-2 VIDEO COMPRESSION. by P.N. Tudor. MPEG-2 is an extension of the MPEG-1 international standard for digital compression of audio and video signals.

MPEG-2: Overview of the systems layer
MPEG-2: Overview of the systems layer P.A. Sarginson, B.Sc. Summary The MPEG-2Systems specification describes how MPEG-compressed video and audio data streams maybe multiplexed ...

MPEG-2 - Wikipedia, the free encyclopedia
MPEG-2 is a standard for "the generic coding of moving pictures and associated audio information". [1] It describes a combination of lossy video compression and lossy audio ...

Apple - QuickTime - MPEG-2 Playback
QuickTime has the ability to play back MPEG-2 content via the QuickTime MPEG-2 Playback Component. It is available as an add-on to QuickTime 6 or QuickTime 7 for $19.99 in the ...

Apple - QuickTime
Apple's multi-platform multimedia software architecture. Supports RTSP/RTP with H.261, H.263, MPEG 1 Video, Layer 1 and 2 Audio, DVI, mu-Law, a-Law and others. [Client, includes ...

MPEG-2 FAQ
Answers questions about the MPEG-2 digital broadcast standard.